DUPLI-COLOR® Acrylic Enamel Clearcoat

DUPLI-COLOR® Acrylic Enamel Clearcoat

by Deleted user -
Number of replies: 0

1. What is the name of the product? 

             DUPLI-COLOR® Acrylic Enamel Clearcoat

2. Name of the Manufacturer of the product.

          Dupli-Color Products Company

3. What is Its  LC 50 (or LD 50)?

Acetone LD50 Oral Rat 5800 mg/kg -

Isobutyl Acetate LD50 Dermal Rabbit >17400 mg/kg -

                          LD50 Oral Rat 13400 mg/kg -

Butane LC50 Inhalation Vapor Rat 658000 mg/m³ 4 hours

Toluene LC50 Inhalation Vapor Rat 49 g/m³ 4 hours

             LD50 Oral Rat 636 mg/kg -

Ethyl 3-Ethoxypropionate LD50 Oral Rat 3200 mg/kg -

Methyl Ethyl Ketoxime LD50 Oral Rat 930 mg/kg -

Hydrotreated Heavy Petroleum Naphtha LC50 Inhalation Vapor Rat 8500 mg/m³ 4 hours

                                                                 LD50 Oral Rat >6 g/kg -

4. LIst a Hazard statement and a Precationary statement of the product.

Hazard statements

Extremely flammable aerosol. Contains gas under pressure; may explode if heated. Causes serious eye irritation. Causes skin irritation. May cause an allergic skin reaction. Suspected of damaging the unborn child. May be fatal if swallowed and enters airways. May cause respiratory irritation. May cause drowsiness or dizziness. May cause damage to organs through prolonged or repeated exposure.

 Precationary statement 

General : Read label before use. Keep out of reach of children. If medical advice is needed, have product container or label at hand.

Prevention : Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear protective gloves. Wear eye or face protection. Wear protective clothing. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray on an open flame or other ignition source. Use only outdoors or in a well-ventilated area. Do not breathe dust or mist. Wash hands thoroughly after handling. Contaminated work clothing must not be allowed out of the workplace. Pressurized container: Do not pierce or burn, even after use.

Response : Get medical attention if you feel unwell. IF exposed or concerned: Get medical attention. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER or physician if you feel unwell. IF SWALLOWED: Immediately call a POISON CENTER or physician. Do NOT induce vomiting. IF ON SKIN: Wash with plenty of soap and water. Wash contaminated clothing before reuse. If skin irritation or rash occurs: Get medical attention. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical attention.

Storage : Store locked up. Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F. Store in a well-ventilated place.

Disposal Dispose of contents and container in accordance with all local, regional, national and international regulations.

Supplemental label elements DELAYED EFFECTS FROM LONG TERM OVEREXPOSURE. Contains solvents which can cause permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the contents can be harmful or fatal. WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Please refer to the SDS for additional information. Keep out of reach of children. Keep upright in a cool, dry place. Do not discard empty can in trash compactor.

Hazards not otherwise classified : None known.

 

5. What material is the product incompatible with?

Incompatible materials: No specific data.

6When was the SDS issued (year)?

          06/21/2018

7. What is the product used for in your workplace?

        Used for a Father's Day craft (tile coasters). The enamal was sprayed on the top of the decorated tile to make it waterproof and heat resistant.